Industry automation
Test & measurement
Solar energy
Trade fairs, Events
Interesting video
AR236.B & AR232.B
APAR AR236.B & AR232.B radio loggers
JZ-500 and JZ-500-C black
JZ-500 and JZ-500-C black cables manufac
HF41F subminiature power relays from HON
GOLDTOOL toolsets in cases
Intel® Neural Compute Stick 2
RS Components announces availability of
MC4 solar connector sets
Multifunctional WIHA LED Torch
G2RV-SR interface relays from OMRON
LUP-20-LED-SMD desktop magnifier
Tektronix AFG31000
Tektronix Redefines the Arbitrary/Functi

CNS650-M Series AC/DC Power Supplies

CNS650-M Series AC/DC Power Supplies

Artesyn Embedded Technologies' CNS650-M series 650 W AC/DC power supplies feature a wide input range and single output

 Artesyn Embedded Technologies CNS650-MU series of single output open-frame AC/DC power supplies are offered in 12 V, 24 V, or 48 V outputs with +15% trim range. Each power supply comes with a 12 V fan output and 5 V standby. All models feature ITE and medical safety approvals and accept a universal input of 90 VAC to 264 VAC. Depending on operating conditions, its 4'' x 6'' x 1.54'' compact and high-density, U-channel construction delivers up to 400 W of output power with free air convection cooling and up to 650 W with 400 LFM of forced air.

The CNS650-M is equipped with an I2C interface available with industry-standard PMBus™ communications protocol. These power supplies are ideal for industrial systems as well as for medical applications. The CNS650-M series power supplies can be stored or shipped at temperatures from -40°C to +85°C and relative humidity from 5% to 95% non-condensing. When the main output is shorted, the output will go to hiccup mode. Recovery will be automatic when the short is removed. The 5 V standby will remain on while the 12 V fan output is off. A short circuit on the 5 V standby will shut down the entire power supply. The power supply will auto recover once the fault condition ceases to exist.

When the main output is shorted, the output will go to hiccup mode. Recovery will be automatic when the short is removed.

Overtemperature Protection (OTP)
The power supply will be internally protected against overtemperature conditions. There will be three overtemperature protection sensors: on the main output, the PFC circuit, and the standby output. When one of the sensing circuits has reached the OTP limit, all outputs, except standby, will shut down and will remain off until the overtemperature condition no longer exists. A suitable hysteresis point between the OTP threshold and the recovery point will be set to ensure there is no frequent on-off cycling of the outputs. The temperature recovery point will be set well within the operating temperature range. Upon reaching the temperature recovery point, all outputs will auto-recover.

EMI Emissions
The CNS650-M series have been designed to comply with the Class B limits per requirements of EN55022 (FCC Part 15) and CISPR 22 (EN55022) for emissions. The unit is tested with Class I input (PE connected) at 650 W full load using resistive load with airflow.

Conducted Emission
The CNS650-M power supplies have internal EMI filters to ensure the power supplies' conducted EMI levels comply with EN55022 (FCC Part 15) and EN55022 (CISPR 22) Class B limits.

Short Circuit Protection (SCP)
The CNS650-M power supplies will withstand a continuous short circuit with no permanent damage, applied to its main output during start-up or while running.

  • Designed for forced air and natural convection cooling
  • Medical and ITE safety approvals, 2x MOPP
  • PMBus interface
  • Active current share with OR-ing FET
  • Dual fused
  • Type BF ready
  • Active power factor correction, 61000-3-2 compliant
  • Built-in Class B EMI filter
  • Less than 1U high
  • 4” x 6” U-channel construction (open-frame or end-fan variants available for 12 V)
  • <500 mW no-load power consumption
  • 80 PLUS® certified (-ME model)
  • Three-year warranty (consult factory for extended terms)

  • Industrial systems
  • Healthcare and medical equipment
    • Ultrasound monitors
    • Blood pressure monitors
    • Incubators
    • ECG equipment
    • Operating tables

CNS650-M Series AC-DC Power Supplies
Image Manufacturer Part Number Description Voltage - Output 1   View Details
AC/DC CONVERTER 12V 650W CNS653-ME AC/DC CONVERTER 12V 650W 12V   View Details
AC/DC CONVERTER 12V 650W CNS653-MF AC/DC CONVERTER 12V 650W 12V   View Details
AC/DC CONVERTER 12V 650W CNS653-MU AC/DC CONVERTER 12V 650W 12V   View Details
AC/DC CONVERTER 24V 650W CNS655-MU AC/DC CONVERTER 24V 650W 24V   View Details
AC/DC CONVERTER 48V 650W CNS658-MU AC/DC CONVERTER 48V 650W 48V   View Details

2019050301 / 12.05.2019 / Various / Digi-Key Electronics /

Digi-Key Announces Exclusive Global Distribution Partnership with Directed Energy, Inc.
Digi-Key Announces Exclusive Global Distribution Partnership with Directed Energy, Inc.
Digi-Key Electronics announces that it has expanded its product portfolio by signing an exclusive global distribution partnership with Directed Energy, Inc. This new partnership adds to the more than 8.7 million products available from more than 800 manufacturers through Digi-Key.
Alves U-Joint Series
Wakefield-Vette's uniquely designed zero-backlash U-joints for applications needing tight torque and motion
Alves U-Joint Series
SCP-X Extreme Environment Series Power Supplies
SCP-X Extreme Environment Series Power Supplies
SolaHD provides a versatile and cost-effective way to deliver reliable distributed and remote field power to machine controls
CPI2-B1-REU Production Device Programmer
Phyton's universal device programmer can be controlled either from a computer or in standalone mode
CPI2-B1-REU Production Device Programmer
USB Type-C™ Connectors
USB Type-C™ Connectors
Kycon's connectors are backward compatible with previous USB versions and meet USB 3.1 Gen2 specifications
nanoSplatch™ nSP250 RF Antenna
Linx Technologies' Wi-Fi/WLAN embedded antenna uses a grounded-line technique for outstanding performance
nanoSplatch™ nSP250 RF Antenna
RIIM™ IP Mesh Network
RIIM™ IP Mesh Network
Radiocraft's industrial IoT wireless IP mesh network enables fast time-to-market
LXRW Series for NFC Antennas
Murata simplifies and automates NFC antenna tuning
LXRW Series for NFC Antennas
PTS636 Series Tactile Switches
PTS636 Series Tactile Switches
C&K's PTS636 series 6.0 mm x 3.5 mm tactile switches for THT and SMT
DRV8876 H-Bridge Motor Driver
Texas Instruments' drivers feature integrated current-sensing and current-sense output
DRV8876 H-Bridge Motor Driver
SARA-R4 Series Wireless Modules
SARA-R4 Series Wireless Modules
u-blox LTE Cat M1/NB1 and 2G/EGPRS modules are made in the miniature SARA LGA form factor
BridgeSwitch™ Integrated Motor Drivers
Power Integrations’ half-bridge motor drivers incorporate two high-voltage N-channel power FREDFETs with low- and high-side drivers in a single, small-outline package
BridgeSwitch™ Integrated Motor Drivers
T8F81C-DK Trion™ BGA81 Development Kit
T8F81C-DK Trion™ BGA81 Development Kit
Efinix's BGA81 development kit includes a license for the Efinix Efinity® software and access to the Efinix support center
ADuCM355 Precision Analog Microcontroller (MCU)
Analog Devices' MCUs feature a chemical sensor interface and are ideal for applications such as environmental sensing
ADuCM355 Precision Analog Microcontroller (MCU)
ADuM4122 Adjustable Slew Rate, Single Isolated Gate Driver
ADuM4122 Adjustable Slew Rate, Single Isolated Gate Driver
Analog Devices' gate driver, 3 A short-circuit (less than 3 Ω) is ideal for applications such as switching power supplies
T4F81C2 Trion™ FPGA
Efinix's FPGA is built on SMIC's 40 nm process and comes in an 81-ball BGA package
T4F81C2 Trion™ FPGA
AP43770 High-Performance Protocol Decoder Supporting USB Type-C™ Power Delivery
AP43770 High-Performance Protocol Decoder Supporting USB Type-C™ Power Delivery
Diodes’ AP43770 supports PPS APDO with 20 mV/step resolution and 50 mA/step current resolution for optimal battery thermal management
SprintIR®-W CO2 Sensor
Gas Sensing Solutions' SprintIR-W CO2 sensor is ideal for high-speed sensing requirements and measuring rapidly changing CO2 levels
SprintIR®-W CO2 Sensor
Company of the week

Yamaichi Electronics USA Inc.
Address Book

Yamaichi Electronics USA Inc.

Fischer Connectors SA


TE Connectivity

akYtec GmbH

SOS electronic s.r.o.


Taiwan Semiconductor

ROHM Semiconductor

ČEZ a.s.

Pickering Interfaces Ltd


Mouser Electronics


RS Components GmbH

Transfer Multisort Elektronik Sp. z o.o.



Willow Technologies


ACS Motion Control

Visual Communications Company, LLC

Sonderhoff Holding GmbH



Hradil Spezialkabel GmbH

Radio Frequency Systems

Apacer Technology Inc.

Pico Technology

BATTERY JAPAN, Osaka, 25.9.-27.9.2019
electronicAsia 2019, Hong Kong, 13.10.-16.10.2019
Hong Kong Electronics Fair, 13.10.-16.10.2019
TAITRONICS 2019, Taipei, Taiwan, 16.10.-18.10.2019
productronica 2019, Munich, DE, 12.-15.11.2019
NEPCON Japan, Tokio, 15.1.-17.1.2020
DistribuTECH, 28.1.-30.1.2020, San Antonio, TX
BATTERY JAPAN, Tokyo, 26.2.-28.2.2020
BATTERY JAPAN, Osaka, 9.9.-11.9.2020
IMTS2020, 14.9.-19.9.2020, Chicago, IL
ISE 2021, Barcelona, Spain, 2.2.-5.2.2021
DistribuTECH, 9.2.-11.2.2021, San Diego, CA
BATTERY JAPAN, Tokyo, 3.3.-5.3.2021
BATTERY JAPAN, Osaka, 29.9.-1.10.2021
DistribuTECH, 25.1.-27.1.2022, Dallas, TX
DistribuTECH, 7.2.-9.2.2023, San Diego, CA
DistribuTECH, 23.1.-25.1.2024, Indianapolis, IN
DistribuTECH, 11.2.-13.2.2025, Dallas, TX
Interesting video
The ISS Design Challenge ...
Interesting video
Mouser Electronics Warehouse Tour with Grant Imahara
naše portály dle jazyka:

česko/slovenská jazyková verze:

anglická jazyková verze:

polská jazyková verze:

ruská jazyková verze:
naše portály dle zaměření:




MALUTKI media s.r.o.
Těrlická 475/22
735 35 Horní Suchá
tel. 00420-603531605
e-mail: info@malutki-media.com

All trademarks are the property of their respective owners.
ISSN 1801-3813